24 ERM
Aluminum slat with a micro-perforated profile that improves aeration, the entry of natural light allowing greater luminosity but in a dimmed way. The size of the holes prevents the entry of insects.
TECHNICAL DATA
7,6 mm
38,3 mm | 24 mm
26 | 42
0,244 kg/m | 10,250 Kg/m²
164 mm | 164 mm
140 mm | 140 mm
6 m
20
120 m/pack
COMPATIBLE
SIDECAPS
SIDECAP SLAT 24 ERM
ref: 45495
COMPATIBLE
END SLATS
With the rubber 4,7x9,5 mm. (ref: 1729), the slat acts as end slat
COMPATIBLE
GUIDES
Guides with interior gap width between 14 and 16 mm. With rubber 6x5,7 mm. (ref: 49198)
For inlay guides use brush 3,8x5 mm. (ref: 39579)
COMPACTS ROLLING
ENROLLAMIENTOS DE COMPACTO
| AXLE | |||||
| Ø 50 | Ø 60 | Ø 70 | |||
| CAJÓN ALUMINIO |
137 | - | - | - | |
| 150 | - | - | - | ||
| 165 | 1190 | 1150 | 1100 | ||
| 180 | 1700 | 1580 | 1460 | ||
| 205 | 1940 | 2080 | 1890 | ||
| 250 | 3380 | 3280 | 3090 | ||
| AXLE | |||||
| Ø 50 | Ø 60 | Ø 70 | |||
| LUXEBOX SUBLIBOX |
155 | - | - | - | |
| 185 | 1760 | 1690 | 1570 | ||
| 215 | 2210 | 2210 | 2140 | ||
| 245 | 2920 | 2920 | 2950 | ||
| AXLE | |||||
| Ø 50 | Ø 60 | Ø 70 | |||
| D. TABIQUE | 155 | - | - | - | |
| 185 | 1760 | 1690 | 1570 | ||
| 200 | 1820 | 1820 | 1750 | ||
| AXLE | |||||
| Ø 50 | Ø 60 | Ø 70 | |||
| ARTBOX | 155 | ABC | - | - | - |
| D | - | - | - | ||
| 185 | ABC | 1470 | 1500 | 1300 | |
| D | 1420 | 1350 | 1260 | ||
| 220 | ABC | 2190 | 2140 | 2140 | |
| D | 2170 | 2140 | 2020 | ||
| AXLE | |||||
| Ø 50 | Ø 60 | Ø 70 | |||
| ARTBOX PREMIUM |
155 | ABC | - | - | - |
| D | - | - | - | ||
| 185 | ABC | 1470 | 1500 | 1300 | |
| D | 1420 | 1350 | 1260 | ||
| AXLE | |||||
| Ø 50 | Ø 60 | Ø 70 | |||
| RT-BOX | 155 | ABC | - | - | - |
| 185 | ABC | 1470 | 1500 | 1300 | |
| D | 1230 | 1180 | 1090 | ||
| 200 | ABC | 1820 | 1700 | 1580 | |
| D | 1390 | 1360 | 1310 | ||
| 220 | ABC | 2190 | 2140 | 2140 | |
| D | 1690 | 1690 | 1640 | ||
The indicated heights (expressed in mm) include the box and the end slat, that is, they are refered to the shutter hollow. These heights are orientative, taking account on the particular conditions of each case.
ROLLING DIAMETERS
|
CURTAIN HEIGHT (m) |
50 |
60 |
70 |
|
1,00 |
170 | 170 | 175 |
|
1,20 |
180 | 170 | 180 |
|
1,40 |
180 | 190 | 195 |
|
1,60 |
195 | 200 | 200 |
|
1,80 |
200 | 200 | 210 |
|
2,00 |
200 | 200 | 215 |
|
2,20 |
215 | 215 | 220 |
|
2,40 |
220 | 220 | 220 |
|
2,60 |
225 | 230 | 230 |
|
2,80 |
230 | 235 | 240 |
|
3,00 |
235 | 245 | 250 |
|
3,20 |
250 | 255 | 255 |
|
3,40 |
260 | 260 | 260 |
|
3,60 |
265 | 270 | 270 |
|
3,80 |
275 | 280 | 280 |
|
4,00 |
280 | 280 | 290 |
|
4,20 |
285 | 285 | 290 |
|
4,40 |
295 | 300 | 300 |
|
4,60 |
300 | 300 | 305 |
*Data (expressed in mm) indicates the rolling diameter.
RESISTANCE TO WIND CHARGE
Classification according to the UNE EN 13659:2016 regulation. This classification has been done through tests upon UNE EN 1932: 2014 regulation “Resistance to the wind charge”.
IMAGES
