
39 C1
Profiled aluminum slat in 39 mm filled with polyurethane.
TECHNICAL DATA
0,23 mm
9 mm
38,6
25,9
0,077 kg/m | 2,000 kg/m²
min. 4 m | max. 7 m
6 m.
55
330 m/pack
0,138 m² K/W
COMPATIBLE
SIDECAPS
SIDECAP 39 C
ref: 2324
COMPATIBLE
END SLATS
45 ER1
50 ER2
COMPATIBLE
RUBBERS
RUBBER 3x5,2
ref: 1733
(With this rubber, the slat acts as end slat)
COMPATIBLE
GUIDES
Guides with interior gap width between 13 and 16 mm. With brush 7x6 mm. (ref: 1888)
For inlay guides use brush 4x6 mm. (ref: 1881)
COMPACT ROLLINGS
|
ALUMINIUM BOX |
LUXEBOX |
SUBLIBOX |
DOUBLE WALL |
ARTBOX |
ARTBOX |
|||||||||||||||
AXLE |
137 |
150 |
165 |
180 |
205 |
250 |
155 |
185 |
215 |
245 |
155 |
185 |
215 |
245 |
155 |
185 |
155 |
185 |
220* |
155* |
185* |
40 |
1670 |
2150 |
2620 |
3260 |
4280 |
- |
1990 |
3060 |
4290 |
- |
1990 |
3060 |
4290 |
- |
1990 |
3060 |
1990 |
3060 |
5030 |
1990 |
3060 |
50 |
1600 |
2070 |
2550 |
3140 |
4160 |
6100 |
1880 |
2980 |
4170 |
5470 |
1880 |
2980 |
4170 |
5470 |
1880 |
2980 |
1880 |
2980 |
4910 |
3150 |
1880 |
60 |
1520 |
1950 |
2390 |
3060 |
4050 |
6020 |
1800 |
2910 |
4050 |
5390 |
1800 |
2910 |
4050 |
5390 |
1800 |
2910 |
1800 |
2910 |
4840 |
1800 |
2910 |
The indicated heights (expressed in mm) include the box and the end slat, that is, they are refered to the shutter hollow. These heights are orientative, taking account on the particular conditions of each case.
(*) The indicated height is for boxes without insulators.
ROLLING DIAMETERS
|
AXLE |
||||
BLIND HEIGHT (m) |
40 |
50 |
60 |
50 ZF |
60 ZF |
1,00 |
120 |
120 |
125 |
120 |
125 |
1,20 |
125 |
130 |
135 |
130 |
130 |
1,40 |
130 |
135 |
135 |
130 |
135 |
1,60 |
140 |
140 |
145 |
145 |
145 |
1,80 |
145 |
150 |
150 |
145 |
150 |
2,00 |
150 |
150 |
155 |
155 |
155 |
2,20 |
155 |
155 |
160 |
155 |
160 |
2,40 |
160 |
165 |
170 |
165 |
165 |
2,60 |
170 |
165 |
170 |
170 |
175 |
2,80 |
170 |
175 |
180 |
175 |
175 |
3,00 |
180 |
180 |
185 |
180 |
180 |
3,20 |
180 |
185 |
185 |
180 |
185 |
3,40 |
190 |
190 |
195 |
190 |
190 |
3,60 |
195 |
195 |
195 |
195 |
200 |
3,80 |
195 |
200 |
200 |
195 |
200 |
4,00 |
205 |
200 |
210 |
205 |
205 |
4,20 |
210 |
205 |
210 |
205 |
210 |
4,40 |
210 |
210 |
215 |
205 |
215 |
4,60 |
215 |
215 |
220 |
215 |
215 |
Data (expressed in mm) indicates the rolling diameter.
RESISTANCE TO THE WIND CHARGE
Classification according to the UNE EN 13659:2016 regulation. This classification has been done through tests upon UNE EN 1932: 2014 regulation “Resistance to the wind charge”.