45 R1
Profiled aluminum slat in 45 mm filled with polyurethane.
TECHNICAL DATA
0,23 mm
9,4 mm
44,3 mm
22,6
0,098 kg/m | 2,220 kg/m²
min. 4 m | max. 7 m
6 m
55
330 m/pack
0,150 m² K/W
COMPATIBLE
SIDECAP
SLAT END CAP 45R1
ref:2329
COMPATIBLE
END SLATS
45 ER1
50 ER2
COMPATIBLE
RUBBERS
RUBBER 3 x 5,2
ref: 1733
(With this rubber, the slat acts as end slat)
COMPATIBLE
GUIDES
Guides with interior gap width between 14 and 16 mm. With brush 7x5 mm. (ref: 59333)
For inlay guide (MOLD 0031) use brush 3,8x5 mm. (ref: 39579)
For inlay guide nº2 (MOLD 0789) and special h25 (MOLD 0161) use brush 7x5 mm. (ref: 59333)
COMPACT ROLLINGS
| AXLE | |||||
| Ø 40 | Ø 50 | Ø 60 | |||
| CAJÓN ALUMINIO |
137 | 1048 | 1005 | 995 | |
| 150 | 1100 | 1250 | 1210 | ||
| 165 | 1506 | 1550 | 1462 | ||
| 180 | 1646 | 1690 | 1602 | ||
| 205 | 2324 | 2280 | 2235 | ||
| 250 | 3720 | 3808 | 3410 | ||
| AXLE | |||||
| Ø 40 | Ø 50 | Ø 60 | |||
| LUXEBOX SUBLIBOX |
155 | 1102 | 1014 | 1010 | |
| 185 | 1780 | 1735 | 1690 | ||
| 215 | 2460 | 2370 | 2195 | ||
| 245 | 3285 | 3285 | 3243 | ||
| AXLE | |||||
| Ø 40 | Ø 50 | Ø 60 | |||
| D. TABIQUE | 155 | 1100 | 1150 | 1060 | |
| 185 | 1590 | 1670 | 1590 | ||
| 200 | 1840 | 1760 | 1580 | ||
| AXLE | |||||
| Ø 40 | Ø 50 | Ø 60 | |||
| ARTBOX | 155 | ABC | 980 | 890 | 750 |
| D | 800 | 750 | 620 | ||
| 185 | ABC | 1480 | 1390 | 1300 | |
| D | 1390 | 1300 | 1170 | ||
| 220 | ABC | 1990 | 1860 | 1720 | |
| D | 2170 | 2080 | 1950 | ||
| AXLE | |||||
| Ø 40 | Ø 50 | Ø 60 | |||
| ARTBOX PREMIUM |
155 | ABC | 980 | 890 | 750 |
| D | 800 | 750 | 620 | ||
| 185 | ABC | 1480 | 1390 | 1300 | |
| D | 1390 | 1300 | 1170 | ||
| AXLE | |||||
| Ø 40 | Ø 50 | Ø 60 | |||
| RT-BOX | 155 | ABC | 980 | 890 | 750 |
| 185 | ABC | 1480 | 1390 | 1300 | |
| D | 1170 | 1130 | 1040 | ||
| 200 | ABC | 1840 | 1800 | 1710 | |
| D | 1360 | 1310 | 1180 | ||
| 220 | ABC | 1990 | 1860 | 1720 | |
| D | 1770 | 1630 | 1550 | ||
The indicated heights (expressed in mm) include the box and the end slat, that is, they are refered to the shutter hollow. These heights are orientative, taking account on the particular conditions of each case.
ROLLING DIAMETERS
|
|
AXLE |
||
|
BLIND HEIGHT (m) |
40 |
50 |
60 |
|
1,00 |
165 | 155 | 155 |
|
1,20 |
165 | 170 | 180 |
|
1,40 |
195 | 185 | 180 |
|
1,60 |
195 | 190 | 200 |
|
1,80 |
205 | 190 | 200 |
|
2,00 |
215 | 210 | 210 |
|
2,20 |
210 | 215 | 220 |
|
2,40 |
225 | 215 | 220 |
|
2,60 |
235 | 235 | 240 |
|
2,80 |
230 | 240 | 245 |
|
3,00 |
255 | 235 | 240 |
|
3,20 |
260 | 255 | 245 |
|
3,40 |
255 | 260 | 265 |
|
3,60 |
255 | 260 | 260 |
|
3,80 |
280 | 275 | 265 |
|
4,00 |
285 | 275 | 285 |
|
4,20 |
275 | 280 | 290 |
|
4,40 |
290 | 280 | 285 |
|
4,60 |
305 | 300 | 285 |
Data (expressed in mm) indicates the rolling diameter.
RESISTANCE TO THE WIND CHARGE
Classification according to the UNE EN 13659:2016 regulation. This classification has been done through tests upon UNE EN 1932: 2014 regulation “Resistance to the wind charge”.
