49 ECM
The new 49 ECM aluminum slat with a micro-perforated profile that improves aeration, the entry of natural light allowing greater luminosity but in a dimmed way.
The size of the holes prevents the entry of insects.
TECHNICAL DATA
8,5 mm
49,7 mm | 70,3 mm
20,12 | 14,28
0,465 Kg/m | 9,356 Kg/m²
(Slat | Microperforated profile)
168 mm | 103 mm
(Slat | Microperforated profile)
210 mm | 103 mm
6 m
10
60 m/pack
COMPATIBLE
SIDECAP
SLAT SIDECAP 49 ECM / 41 EC
ref: 72247
COMPATIBLE
END SLATS
45 ER1 | 50 ER2 | 60 ER2
COMPATIBLE
GUIDES
Guides with interior gap width between 14 and 16 mm. With rubber 6x5,7 mm. (ref: 49198)
With inlay guides use brush 3,8x5 mm. (ref: 49198)
COMPACT ROLLINGS
| AXLE | |||||
| Ø 50 | Ø 60 | Ø 70 | |||
| CAJÓN ALUMINIO |
137 | 770 | 750 | 690 | |
| 150 | 900 | 880 | 820 | ||
| 165 | 1070 | 1040 | 980 | ||
| 180 | 1420 | 1350 | 1300 | ||
| 205 | 1940 | 1940 | 1890 | ||
| 250 | 3400 | 3400 | 3350 | ||
| AXLE | |||||
| Ø 50 | Ø 60 | Ø 70 | |||
| SUBLIBOX | 155 | 810 | 780 | 730 | |
| 185 | 1350 | 1270 | 1220 | ||
| 215 | 1960 | 1960 | 1910 | ||
| 245 | 2690 | 2760 | 2710 | ||
| AXLE | |||||
| Ø 50 | Ø 60 | Ø 70 | |||
| D. TABIQUE | 155 | 900 | 880 | 820 | |
| 185 | 1420 | 1350 | 1300 | ||
| 200 | 1640 | 1610 | 1560 | ||
| AXLE | |||||
| Ø 50 | Ø 60 | Ø 70 | |||
| ARTBOX | 220 | ABC | 2010 | 2000 | 1920 |
| D | 1890 | 1850 | 1800 | ||
| AXLE | |||||
| Ø 50 | Ø 60 | Ø 70 | |||
| ARTBOX PREMIUM |
155 | ABC | 890 | 860 | 800 |
| D | 870 | 840 | 780 | ||
| 185 | ABC | 1420 | 1350 | 1300 | |
| D | 1220 | 1160 | 1100 | ||
| AXLE | |||||
| Ø 50 | Ø 60 | Ø 70 | |||
| RT-BOX | 155 | ABC | 890 | 860 | 800 |
| 185 | ABC | 1420 | 1350 | 1300 | |
| D | 1080 | 1140 | 1080 | ||
| 200 | ABC | 1620 | 1600 | 1540 | |
| D | 120 | 1150 | 1100 | ||
| 220 | ABC | 2040 | 1980 | 1930 | |
| D | 1520 | 1470 | 1420 | ||
The indicated heights (expressed in mm) include the box and the end slat, that is, they are refered to the shutter hollow. These heights are orientative, taking account on the particular conditions of each case.
ROLLING DIAMETERS
|
|
AXLE |
||
|
CURTAIN HEIGHT (m) |
50 |
60 |
70 |
| 1,00 | 155 | 160 | 160 |
| 1,20 | 160 | 170 | 175 |
| 1,40 | 175 | 180 | 185 |
| 1,60 | 185 | 185 | 190 |
| 1,80 | 195 | 195 | 200 |
| 2,00 | 205 | 205 | 210 |
| 2,20 | 215 | 215 | 220 |
| 2,40 | 220 | 220 | 225 |
| 2,60 | 225 | 225 | 230 |
| 2,80 | 230 | 230 | 235 |
| 3,00 | 235 | 235 | 240 |
| 3,20 | 240 | 240 | 245 |
| 3,40 | 250 | 250 | 255 |
| 3,60 | 255 | 255 | 260 |
| 3,80 | 260 | 260 | 265 |
| 4,00 | 265 | 265 | 270 |
| 4,20 | 265 | 270 | 275 |
| 4,40 | 280 | 285 | 285 |
| 4,60 | 285 | 290 | 290 |
* Data (expressed in mm) indicates the rolling diameter.
RESISTANCE TO WIND CHARGE
* Classification according to the UNE EN 13659:2016 regulation. This classification has been done through tests upon UNE EN 1932: 2014 regulation “Resistance to the wind charge”.
IMAGES
